Overview
The Energy Suspension sway bar bushing set, product code 8.5135G in black, is a front polyurethane set for a 29 mm sway bar. Polyurethane bushings are a firmer alternative to factory rubber bushings.
The set is a sway bar and end link bushing set with greaseable bushings that take zerk fittings for periodic lubrication. Built-in lubricant channels help grease reach the bushing surfaces.
Key features
- Black polyurethane construction
- Front position
- Sized for a 29 mm sway bar
- Zerk fittings for periodic greasing
- Built-in lubricant channels
Keeping sway bar bushings working
A sway bar reduces body roll by linking the two sides of the suspension, and the bushings hold the bar to the frame while letting it rotate. Polyurethane bushings are firmer than factory rubber, which keeps the bar more controlled during cornering and on uneven trails. That firmness also means less give, so the bushing mounts and the bar itself should be solid and free of cracks before the new set goes in.
Greaseable bushings need periodic lubrication to avoid squeaks and dry wear. Grease the fittings on a regular schedule, and again after wet or muddy trail runs, because water and grit can wash lubricant out. End links often wear alongside the bushings, so inspect their joints at the same time and replace them together when play shows up.
- Look for squeaks over bumps as a sign the grease has run low
- Check bushing mounts for cracks or looseness
- Inspect end link ball joints when replacing bushings
- Re-check fastener torque after the first few drives
Specifications
| Brand | Energy Suspension |
|---|---|
| Product code | 8.5135G |
| UPC | 703639086369 |
| Color | Black |
| Material | Polyurethane |
| Position | Front |
| Bar diameter | 29 mm |
| Lubrication | Greaseable, zerk type fittings |
Vehicle fitment
It is a front bushing set for a 29 mm sway bar. Match your vehicle’s year, model and trim to the set and measure the sway bar before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Grease the zerk fittings on a regular schedule. Confirm the sway bar diameter is 29 mm before fitting these bushings.
What’s included
This is a front bushing set. Check the package contents against your installation before starting.









