Overview
The Drake Locking Hood Hold Downs in stainless steel, part number JP-190021-LK, are a matched pair of locking hood hold downs from Drake Off Road for the Jeep Wrangler. The hold downs combine a locking hood pin with a turnbuckle-style center piece that adjusts the length between the two mounting points.
The body mounts are reinforced for added strength and durability. Each locking pin is tethered to its mount by UV resistant, PVC coated stainless steel cable.
The hold downs use a billet aluminum turnbuckle and stainless steel heim joints, so the length can be set to suit your mounting points.
Key features
- Locking hood pins that secure the hood
- Billet aluminum turnbuckle with heim joints at both ends
- Reinforced body mounts for extra strength
- Pins tethered by UV resistant, PVC coated stainless steel cable
- Sold as a pair
Setting up the hood hold downs
Hood hold downs keep the hood from lifting under load, so the mounting points carry most of the stress when the vehicle flexes off road. Setting the turnbuckle length is the step that matters most. Measure the gap between the two mounts with the hood closed, then adjust the center piece until both pins seat without forcing the hood out of alignment. Recheck the setting after the first few trail runs, since mounts can settle.
The heim joints allow a small amount of angle, which helps when the mounts are not perfectly square. Stainless steel resists corrosion, but the threads on the adjustment area still need a light coat of grease to keep the turnbuckle turning freely. Inspect the cable sheathing for cuts and check that the locking pin still engages cleanly each time the hood is closed.
- Check heim joints for play after rough terrain
- Keep turnbuckle threads clean and lubricated
- Inspect cable sheathing for abrasion
Specifications
| Brand | Drake Off Road |
|---|---|
| Part number | JP-190021-LK |
| UPC | 70000708426 |
| Finish | Stainless steel |
| Turnbuckle | Billet aluminum |
| Joints | Stainless steel heim joints, both ends |
| Tethers | UV resistant, PVC coated stainless steel cable |
| Mounts | Reinforced body mounts |
| Lock type | Locking |
| Quantity | Sold as a pair |
Vehicle fitment
This set is for the Jeep Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
This is a pair of locking hood hold downs. Each hold down includes a locking hood pin, a billet aluminum turnbuckle center piece, stainless steel heim joints and a tethered cable.









