Overview
The Dee-Zee poly crossover tool box, part number DEEDZ6163P, is a black poly box that combines a crossover tool box with hardened poly plastic. It is universal fit and is not built for one specific pickup. It measures 62.5 by 14.75 by 14.37 inches.
The center cross support ties the front and rear of the box together. A double-wall lid adds rigidity, and a molded brite-tread pattern on the lid pairs with textured plastic. An overlapping flap deflects water, and a foam gasket provides a second line of defense. The box sits only inches above the bed rail and is designed to match spray-in bed liners.
The lid is double walled, which Dee-Zee says adds rigidity, and a center cross support ties the front and rear of the box together. An overlapping flap on the lid deflects water before it reaches the foam gasket, which is the second line of defense against moisture.
Metal striker plates built into the lid engage a full-length locking rod that pulls the lid down. A rotary keyed lock holds the rod in place when locked, and both the keyhole and the sliding rod are on the driver’s side. The poly construction is designed to resist sagging and denting under heavy use.
Key features
- Hardened poly plastic construction
- Double-wall lid with molded brite-tread pattern
- Center cross support
- Overlapping flap and foam gasket to keep out water
- Metal striker plates built into the lid
- Single locking rod with a rotary keyed lock
- Narrow design that clears truck bed wheel wells
- Low-profile lid
Choosing a crossover box
A crossover tool box sits across the bed, usually just ahead of the wheel wells, so the bed floor stays open for cargo. Because fit is universal, the right size depends on the truck. Measure the bed width and rail spacing first, then decide between a shorter and a longer box based on how much storage the job needs.
Poly boxes are lightweight and resist corrosion, which suits trucks that spend time in wet or salty conditions. Keep the drain areas and the lid seal clear of grit, and check the locking rod and keyed lock now and then. Inspect the gasket for flattening after long storage, since a worn seal lets water and dust into the box. Good storage planning keeps tools dry and easy to reach.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DEEDZ6163P |
| Type | Poly crossover tool box |
| Finish | Black |
| Length | 62.5 inches |
| Width | 14.75 inches |
| Height | 14.37 inches |
| Lock | Rotary keyed lock, driver side |
Vehicle fitment
Universal fit, so it is not matched to one pickup. It comes in two lengths: 63 inches for midsize trucks and 70 inches for full-size trucks. Check the bed width and rail spacing of your truck before choosing a length.
Confirm your vehicle’s year, model and trim before ordering.



















