Overview
The Crown Automotive 6511744AA is a door hinge nut with an M6 x 1.0 thread, for the 2007–2018 Jeep Wrangler (JK). It fits two-door and four-door models, in the front or rear door and the upper or lower hinge position.
The nut is a small fastener, so the thread size is the main specification to check against the hinge it is paired with.
Key features
- M6 x 1.0 metric thread
- Front or rear door positions
- Upper or lower hinge positions
- Two-door and four-door models
Installing a hinge nut
A door hinge nut is a small fastener, but it carries the weight of the door through the hinge. When the threads wear or strip, the door can sag, rub the frame or sit out of line. Starting with clean threads on the nut and bolt helps the fastener seat squarely and hold torque.
Before you install, check the thread against the hinge bolt and make sure the nut sits flat in its pocket. Work with a steady hand, since cross-threading ruins both parts. Once the door is hung, open and close it several times and check the gap and alignment before final tightening.
- Use a thread chaser on damaged bolts
- Keep threads free of debris and old sealant
- Recheck door alignment after the first few trips
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 6511744AA |
| UPC | 849603020647 |
| Thread | M6 x 1.0 |
| Type | Door hinge nut |
| Position | Front or rear, upper or lower |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), covering two-door and Unlimited four-door bodies.
Fit is for the JK Wrangler only, not the TJ, LJ, YJ or JL. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One door hinge nut.









