Overview
The Fabtech FTS22259 is Component Box 2 of 2, the second box in a set for Fabtech 4 in. lift kits. It is named for kit numbers K2258 and K2258M.
Component Box 1 of 2 completes the set, so use the same kit number on both boxes when you plan the build.
Key features
- Box 2 of 2 in a Fabtech two-box set
- Designed for 4 in. lift applications
- Named for two Fabtech kit numbers
- Brand Fabtech, part number FTS22259
Planning a two-box build
A two-box kit is easiest to plan from the start. Compare both kit numbers on your lift with the numbers that appear on this box, then confirm that the first box in the set is on hand. Ask whether the 4 in. height suits your tire size and driving use, since that choice guides the rest of the purchases.
Shorter lifts still change how a vehicle sits, so check steering travel, driveline angles and brake hose length after installation. Torque every fastener to specification once the setup has settled, then inspect again after the first few drives. Replacing worn bushings and shock mounts at the same time keeps newer parts from being stressed by older ones. Keep a short log of what was installed for future service.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22259 |
| UPC | 674866105515 |
| Lift height | 4 in. |
| Box position | Box 2 of 2 |
| Kit numbers | K2258, K2258M |
| Category | Suspension > Lift Kit-Suspension Component |
Vehicle fitment
Fit follows the kit numbers instead of a single vehicle. Check your vehicle’s year, model and trim against the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Lay out all hardware and compare it with your install plan before starting.
Not included: Component Box 1 of 2 and the rest of the lift kit parts.









