Overview
The Bestop Traditional Bikini Top in black mesh, part number 52508-11, is a front-only cockpit cover for Jeep CJ7, Scrambler and Wrangler YJ models. It attaches to the windshield header and to the footman loops in the rear body tub, covering the front cockpit area only. It fits 1976–1986 Jeep CJ7, 1981–1985 Jeep Scrambler and 1987–1991 Jeep Wrangler YJ.
The top uses a header channel. The stock windshield retainer can be used with modification, or the separate 5120901 windshield channel can be used. Long straps and two snaps, one on each side of the windshield retainer, hold the top in place.
Key features
- Black mesh that allows unobstructed airflow on selected models
- Fabric built to hold its shape across temperatures, with mildew resistance and UV fading resistance
- High-strength thread at all stress points
- Industrial-grade webbing to reduce flapping
- Long rear straps and two snaps at the windshield retainer
- All mounting hardware included
Keeping mesh tops in shape
Mesh cockpit covers are exposed to sun, wind, and dust, so they need periodic checks. Look at the straps, snaps, and loops for wear before each season. A snap that pulls loose or a strap that frays at its base should be repaired before the top flaps in wind and tears the mesh around the attachment point.
Clean mesh with a soft brush and mild soap, then rinse and dry it fully before folding. Avoid high-pressure washers near the seams. If the top uses a windshield retainer, check it for cracks and bending, because that is where the header channel loads the top. Mesh covers sit best when the loops are square and the channel is seated, so recheck the fit whenever the top is removed and reinstalled.
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52508-11 |
| UPC | 77848020910 |
| Coverage | Front cockpit area |
| Color | Black mesh |
| Dimensions | 55 in long by 47-1/2 in wide |
| Required header channel | 51209-01 |
| Optional windshield channel | 5120901 |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade), 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL and SR) and 1987–1991 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, S, Sahara and Sport).
Later Wrangler generations such as the TJ and JK do not fit, and Scrambler years end in 1985. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan on the 51209-01 header channel or the 5120901 windshield channel before fitting the top. Check the snaps and loops against your windshield retainer, and keep the mesh clear of sharp edges when routing the long straps.
What’s included
All mounting hardware is included with the top.
Not included: The 51209-01 header channel is required and is not included. The 5120901 windshield channel is a separate part.









