Overview
The Bestop 52508-01 is a Traditional Bikini Top in Black vinyl. It covers the front cockpit area and connects to the footman loops at the rear of the vehicle. It fits the 1976-1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims.
Mounting uses two snaps, one on each side of the windshield retainer, and long straps that attach at the back of the vehicle. The top is built from premium fabric with high strength thread and industrial-grade webbing, and it is designed to maintain its shape in any temperature.
Key features
- Black vinyl construction
- Covers the front cockpit area
- Two snaps, one on each side of the windshield retainer
- Long straps attach at the back of the vehicle
- High strength thread at all stress points
- Industrial-grade webbing to limit flapping
- Optional tear-resistant mesh on selected models
- All mounting hardware included
Choosing a windshield retainer
The windshield is the main attachment point for a bikini top, so the retainer choice matters. The stock retainer can be used, but it may need modification before the snaps line up well. An alternative channel gives a fixed, consistent mounting line, which many owners prefer when they swap tops often.
Before fitting, inspect the windshield frame for cracked paint, rust or bent edges. Rust near the attachment points can spread under a top that flexes in wind. Clean the area and treat any bare metal before you install, and check the snap positions with the top held in place.
Straps running to the footman loops carry most of the wind load, so inspect the stitching at each loop and the webbing for fraying. Replace worn straps before they fail on the highway. Recheck the snaps and straps after the first few drives, since fabric settles as it breaks in.
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52508-01 |
| UPC | 77848022471 |
| Color | Black |
| Material | Black vinyl |
| Coverage | Front cockpit area |
| Dimensions | 55 inches long, 47-1/2 inches wide, 42.5 inches down the center |
| Snaps | 2 |
| Windshield channel | 51209-01, separate part |
Vehicle fitment
It fits the 1976-1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, the 1981-1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR trims, and the 1987-1991 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, S, Sahara and Sport trims.
The CJ5 and the later Wrangler generations are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose between the stock windshield retainer, which requires modification, and the separate 51209-01 windshield channel. Attach the two snaps, one on each side of the retainer, and connect the long rear straps to the footman loops.
What’s included
The Black vinyl Traditional bikini top, its two snaps and all mounting hardware, part number 52508-01.
Not included: the 51209-01 windshield channel, which is a separate part.









