Overview
The Bestop Traditional Bikini Top, part number 52507-01, is a black vinyl cover that attaches to the rear of the vehicle with long straps and footman loops. It covers the driver’s compartment only.
It uses the stock windshield retainer and has 2 snaps, one on each side of the retainer. The bikini measures 55 inches long by 46-1/2 inches wide.
Key features
- Black vinyl construction
- Uses the stock windshield retainer with a snap on each side
- Long straps connect to the footman loops at the rear
- All mounting hardware is included
- Measures 55 inches long by 46-1/2 inches wide
Before you mount it
A bikini top covers the front seats and leaves the rear open, so it suits owners who want sun and weather cover without a full soft top. Because it depends on footman loops and long straps at the rear, fit depends on how the straps are routed and tensioned. Lay the straps flat and keep the top square across the windshield before tightening the snaps.
Drilled mounting points are permanent, so mark them and check each one twice before cutting into the body. If the vehicle carries a bar or roll cage, confirm the straps clear it before you begin. Vinyl stiffens in cold weather, so fold it carefully and avoid sharp creases that can crack the material over time.
- Check snaps and stitching every few months
- Replace straps that show fraying at the stitching
- Clean vinyl with mild soap and water and dry fully before folding
- Keep petroleum-based cleaners away from the vinyl
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52507-01 |
| UPC | 77848022426 |
| Color | Black |
| Material | Vinyl |
| Dimensions | 55 inches long by 46-1/2 inches wide |
| Snaps | 2 |
| Mounting | Footman loops and straps; drilling required |
| Drill-in header | 51209-01, needed if not using a soft top |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Some models may need a windshield channel, which is not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, so plan the mounting points before starting. If you are not using a soft top, a drill-in header (51209-01) is needed for the install.
What’s included
The bikini top with its long straps, 2 snaps and all mounting hardware.
Not included: the drill-in header (51209-01) needed if you are not using a soft top, and the windshield channel some models may require.








