Overview
The Bestop Sunrider for Hardtop in Black Diamond, part number 52450-35, is a folding soft front panel for the 2007–2016 Jeep Wrangler (JK) with the factory hardtop. Its all-weather, year-round design replaces the bulky Freedom Panels.
The Sunrider folds back for an open-sky ride, or can be pulled forward and latched to the windshield header like the original panels. It comes completely assembled, with the folding frame and fabric pre-installed, and no drilling is required.
Key features
- Replaces the factory hardtop front panels, and can be removed completely if desired
- Unique folding design that flips back for an open-sky ride
- Pulls forward and latches to the windshield header
- Includes the folding frame with the fabric pre-installed
- Includes upper door mounting rails with hardware
- Completely assembled and ready to install
- No drilling required
- It is built for ease of use and durability.
Using the panel day to day
A folding front panel changes how the cabin feels in weather. When it is folded back, wind and sun reach the front seats, so plan for sun protection and cabin temperature. When it is pulled forward and latched, the seal and the latch alignment matter most. Watch for gaps along the windshield header, which can let in wind noise and water.
Fabric panels respond to dirt and moisture. Brush off grit before folding, and let the fabric dry completely before closing the panel. Check the frame joints after off-road use, since flexing can loosen hardware over time. Keep the door mounting rails clear of debris so the doors close without pressure on the panel.
- Clean the fabric with mild soap and water
- Check latch alignment after each fold
- Tighten hardware after rough trails
- Keep the seal clean for a snug fit
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52450-35 |
| UPC | 77848130381 |
| Product type | Hardtop soft front panel (Sunrider) |
| Color / fabric | Black Diamond (factory-style Black Diamond Sailcloth) |
| Body styles | 2 and 4-door models |
| Hardware | Included |
| Doors | Not included |
| Window type | None |
| Fit type | Direct fit |
Vehicle fitment
The panel fits 2007–2016 Jeep Wrangler (JK) models that have the factory hardtop, and it is made for 2 and 4-door models.
It does not fit 2017–2018 Wrangler JK models, TJ or JL generations, or a JK without the factory hardtop. Before ordering, check your year, model, trim and top type.
Installation notes
The Sunrider is completely assembled, and Bestop says no drilling is required. Make sure the door mounting rails and latches are secure and do not interfere with the doors, seat belts or windshield. Check that the panel latches fully to the windshield header, and re-check the hardware after the first miles of driving, especially after off-road use.
What’s included
A folding frame with the fabric pre-installed, plus upper door mounting rails with hardware.
Not included: Doors and the factory hardtop are not included.






















