Overview
The Bestop Rear Floor Liner in Black, part number BST51515-01, is a single custom-molded thermoplastic floor liner for the rear floor of the four-door Jeep Wrangler JL Unlimited. It is made to cover the rear floor across its full width, including the transmission tunnel, so the carpet stays protected across that area.
Rear floor liners catch the dirt, mud, wet gear and trash that collect on the back floor of a four-door Jeep. This Bestop liner is designed to work with the JLU floor anchors and has contoured edges for a precise fit that stays put. It is one piece rather than a pair. Owners can lift it out, hose it down and set it back in place, and Bestop provides a lifetime limited warranty.
Key features
- Single rear floor liner with full-width coverage that includes the transmission tunnel
- Made for four-door JLU models and designed to work with JLU floor anchors
- Thermoplastic elastomer (TPE) material that Bestop says outperforms cheaper liners and mats in extreme conditions
- Tall 5/16-inch treads that minimize slip
- Raised edge lip that Bestop says holds up to 40% more liquid and channels mud away from shoes
- Molded carpet-grabbing nibs help secure the liner to the vehicle’s carpet
- Contoured fit for complete coverage and stay-in-place stability
Keeping the liner clean
Floor liners work as a barrier, so their main job is to keep moisture and debris off the carpet. Once a liner is in place, check that its edges sit flat against the floor and that nothing under the carpet has shifted. A liner that rides up can trap water along its edge, so reseat it after loading heavy gear or passengers.
Cleaning works best when the liner is removed. Shake out loose grit, brush the tread grooves, then rinse with water and a mild cleaner. Let it dry fully before setting it back, and avoid solvents that can dull the finish. Check the floor anchors and the carpet beneath during cleaning, since dirt and water can collect there and cause staining or odor.
- Remove the liner before deep cleaning
- Dry fully before reinstalling
- Check anchors and carpet underneath
- Reseat after loading heavy gear
Specifications
| Brand | Bestop |
|---|---|
| Part number | BST51515-01 |
| Product type | Single rear floor liner |
| Material | Thermoplastic (TPE) |
| Color | Black |
| Location | Rear |
| Over the hump | No |
| Coverage | Full width, includes transmission tunnel |
| Tread height | 5/16 inch |
| Fitment type | Direct fit |
| Warranty | Lifetime limited warranty |
Vehicle fitment
The manufacturer fitment list covers the 2018–2026 Jeep Wrangler (JL) Unlimited four-door models, including the Moab, Sahara, Sport, Willys, Rubicon and High Altitude trims. Listed versions include the 4xe, Rubicon 392, Sahara Altitude and Sport Altitude models. Every listed trim is a four-door.
Two-door Wrangler JL models are not on the list, and neither are JK, TJ or other Jeep generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One single rear floor liner in black, Bestop part BST51515-01.
Not included: Front floor liners. Those are a separate product, Bestop part BST51514-01.









