Overview
The BajaRack Light Clamp Mount (part number BAEBRLTCLAMP1) is a clamp for 1-inch tubing that positions small lights on different parts of a rack. It comes 1 per set.
Because the clamp is sized by tubing diameter, measure the tubing on your rack before ordering.
Key features
- Clamp sized for 1-inch tubing
- Positions small lights on the rack
- Can be placed on different parts of the rack
- Comes 1 per set
Wiring and light placement
A rack clamp holds a light in a fixed spot, but the light still needs a stable power feed and a good ground. Run the wire along the tubing with separate loom or zip ties so it cannot snag on branches, roof loads or the rack edge. Keep the switch within easy reach from the driver’s seat so the light can be turned off when it is not needed, and avoid aiming it into oncoming traffic.
Vibration is the usual cause of trouble. Tighten clamp fasteners after the first few trips, and check that the light body does not rotate under its own weight. Tubing that flexes or rattles can loosen a clamp over time, so a second look after rough trails is worthwhile. Leave slack in the wiring at the clamp so it is not pulled tight when the rack moves.
- Use a fuse close to the power source
- Keep wire loom and ties away from moving parts
- Re-tighten clamps after rough trails
- Aim lights to avoid oncoming drivers
Specifications
| Brand | BajaRack |
|---|---|
| Part number | BAEBRLTCLAMP1 |
| Tubing size | 1-inch |
| Quantity | 1 per set |
| Use | Positioning small lights on the rack |
Vehicle fitment
No vehicle years or models are listed. The clamp is matched to 1-inch tubing rather than to a specific vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lights clamped to the rack need fused relay wiring, and road-use rules for auxiliary lights vary by location, so check them before installing.
What’s included
The set contains 1 clamp.
Not included: the small lights the clamp holds.











