Select your vehicle

Auto Ventshade Smoke Ventvisor (Smoke) – 92011

Auto Ventshade

$44.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 8:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Original Ventvisor design for 1987–1994 Nissan D21, 1987–1990 Pathfinder and 1995–1997 Nissan Pickup
  • Keeps rain out while windows are partly open
  • Reduces heat build-up in the cab
  • Two-piece smoke set with 3M adhesive foam tape

Description

Overview

The Auto Ventshade Smoke Ventvisor, part number AVS92011, is a front smoke window deflector for the 1987–1994 Nissan D21, the 1987–1990 Nissan Pathfinder and the 1995–1997 Nissan Pickup. It is the original Ventvisor design, which lets fresh air in while keeping rain out.

With the windows partly open, the deflector helps reduce heat build-up in the cab. It is a two-piece set that attaches with 3M adhesive foam tape, and it carries a limited lifetime warranty.

Key features

  • Original Ventvisor design
  • Keeps rain out while the window is partly open
  • Reduces heat build-up in the cab
  • Smoke finish
  • Two-piece set
  • Attaches with 3M adhesive foam tape

Airflow and rain protection basics

Window deflectors work by shaping the air that passes over an open window. As the vehicle moves, the deflector directs air up and over the opening, which lets fresh air move into the cab while reducing the amount of rain that blows in. Wind noise can change slightly depending on window position and speed, so it is worth testing the setup on a dry day.

Adhesive-mounted deflectors depend on a clean bond. Wash the window and the deflector edges before fitting, and avoid touching the tape once it is pressed in place. Re-check the edges after a few car washes and after exposure to heat, since tape can soften or lift if it was not sealed properly at first.

Consider how the deflector sits relative to the wiper arc and the door seal. A deflector that touches the seal or sits too close to the glass edge may rattle or fail to seal, so check clearance by opening and closing the window through its full travel.

  • Clean glass and deflector edges before fitting
  • Check clearance with the wipers and door seal
  • Inspect tape after heat and car washes

Specifications

Brand Auto Ventshade
Part number AVS92011
Position Front
Piece count 2 pc.
Finish Smoke
Mounting 3M adhesive foam tape, no drilling
Warranty Limited lifetime

Vehicle fitment

It fits the 1987–1994 Nissan D21 in Base, E, SE and XE trims, the 1987–1990 Nissan Pathfinder in E, SE and XE trims, and the 1995–1997 Nissan Pickup in Base, SE and XE trims.

Pathfinder model years after 1990 and Nissan Pickup years outside 1995–1997 are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

No drilling is needed, because the deflector is held in place with 3M adhesive foam tape.

What’s included

The set is two pieces. Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Nissan D211987–1994Base, E, SE, XE
Nissan Pathfinder1987–1990E, SE, XE
Nissan Pickup1995–1997Base, SE, XE

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the AVS92011 fit a 1990 Nissan Pathfinder?

Yes. It fits the 1987–1990 Nissan Pathfinder in E, SE and XE trims. Pathfinder model years after 1990 are not covered, so confirm your year and trim before ordering.

How is the Smoke Ventvisor installed?

It installs with 3M adhesive foam tape and needs no drilling. That keeps the vehicle's body free of new holes.

Does this Ventvisor reduce heat inside the cab?

Yes. It reduces heat build-up in the cab and lets the windows stay partly open for airflow while keeping rain out. These are the benefits of this two-piece smoke set.

How do I clean a window deflector without damaging the tape?

Wash the deflector with mild soap and water and avoid strong solvents near the adhesive. Use a soft cloth and dry the edges. Check the foam tape at each wash and press down any lifting corners before they grow.

How do I remove a deflector later?

Warm the deflector gently with a hair dryer to soften the adhesive, then lift one edge slowly with a plastic trim tool. Remove any leftover tape residue with an adhesive remover made for automotive paint.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon