Overview
The ARB Side Floor Kit, part 80FK, is a vehicle-specific floor kit that gives a flat floor from the side wall of the vehicle and creates storage space underneath. It is designed for drawer modules and not for low roller floor modules.
Kits are offered for most popular vehicle models. The kit also opens access to the factory jack storage location.
Key features
- Flat floor from the side wall
- Storage space underneath the floor
- Access to the factory jack storage location
- Made for drawer modules, not low roller floor modules
- Vehicle-specific kits for popular models
Before you install
A side floor kit changes the space beside the drawer, so the first step is confirming the module type and the floor height your vehicle needs. Drawer modules sit on the kit, and the storage underneath is useful for tools and recovery gear that would otherwise sit loose. Before fitting, look at how the kit meets the side wall and check that wiring, fuel lines and brake lines routed under the floor have clearance. Many owners remove the old floor first, so take photos and label fasteners as you go.
Re-check bolts after the first few trips on rough tracks, because a floor that flexes can loosen fixings over time. Keep the load within the area the kit supports and avoid stacking heavy items on the drawer edge.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 80FK |
| UPC | 9332018013699 |
| Kit type | Side floor kit |
| Compatible modules | Drawer modules only |
| Not compatible with | Low roller floor modules |
Vehicle fitment
Each kit is made for a particular vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit suits drawer modules only. Confirm the module type before installation, because low roller floor modules are not supported.
What’s included
Not included: Drawer modules. The kit is for drawer modules, so a compatible module is needed separately.








