Overview
The ARB 70 x 44 inch Flat Rack with Mesh Floor Kit, part number ARB3813030K4, is a steel roof rack for the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims. The rack measures 45 inches wide and 72 inches long, and its size is designated 70 x 44 inch. Confirm the dimensions fit your roof before ordering.
A roof rack gives touring vehicles a place for bulky, lightweight gear that does not fit inside the cabin. This flat rack has four planks and cross bars, and waterproof bags can be added to keep gear protected from the weather.
Key features
- Four planks for a broad flat platform
- Cross bars included
- Steel construction
- Black powder coat finish
- Includes a mesh floor kit.
- Installation does not require drilling.
Loading and tie-downs
Flat racks suit soft, bulky loads such as sleeping bags, tents and dry bags, but load weight should stay evenly spread across the planks. Keep loads well within the rack’s capacity. Place heavier items low and near the cross bars, and use straps that go around the rack rather than over fragile parts. Recheck tie-downs after the first few miles, since loads settle and straps can stretch.
Roof height adds to the vehicle’s overall height, so keep garage and drive-through clearances in mind before loading. Wind noise and fuel use rise with a loaded rack, and speeds on rough tracks should be reduced when the load is high. Waterproof bags protect contents, but keep the bag seams closed and the rack surface clean to reduce wear on the powder coat. Check the rack regularly for loose bolts.
- Spread weight across all four planks
- Recheck straps after the first stretch of driving
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB3813030K4 |
| Roof rack type | Roof rack, flat rack |
| Listed size (title) | 70 x 44 inch |
| Width (specifications) | 45 inches |
| Length (specifications) | 72 inches |
| Height | 16 inch |
| Planks | 4 |
| Cross bars included | Yes |
| Material | Steel |
| Finish | Black powder coat |
| Installation | Drilling is not required |
| Fitment type | Direct fit |
Vehicle fitment
The fitment covers the 2003–2009 Toyota 4Runner in Limited, SR5 and Sport trims.
Other 4Runner generations and model years, including those before 2003 and after 2009, are not covered. Check your year, model and trim against this fit before ordering.
Installation notes
Drilling is not needed for installation. Check that all rack fasteners are tight before loading, since the flat platform carries the full load.
What’s included
Four planks, cross bars and the mesh floor kit are included.
Not included: Separate mounting hardware is not part of the kit, so check the package contents before installing.









