Overview
The AMP Research BedXtender Bracket Kit, part number 74613-01A, is a set of two steel brackets for installing AMP Research BedXtender truck bed extenders on the 2019 to 2020 Ford Ranger in the Lariat, XL and XLT trims.
The brackets come with all the hardware needed for installation and with vehicle-specific instructions. AMP Research asks installers to read the instructions completely and follow each step precisely, because the brackets set the extender’s position on the truck bed.
Key features
- Set of two brackets
- Steel construction
- Includes all hardware for installation
- Vehicle-specific installation instructions included
- Manufactured in the U.S.A.
- 3-year/36,000 mile warranty
Bed extender basics
A bed extender adds support to the bed-side area when a load sits past the tailgate, and the brackets carry the weight through the bed rails. Because the brackets set the position, any movement during driving puts stress on the bolts and bed contact points. A load that shifts can also rock the extender, so secure cargo before driving off.
Keep the bed clean where the brackets sit, since grit between parts can wear the finish and loosen fasteners over time. Recheck bolt tightness after the first few drives, and again after rough roads. Store the extender and brackets out of the weather when they are not in use.
- Check tailgate clearance before installing
- Recheck bolts after the first few drives
- Keep brackets clean where they sit on the bed
- Secure loads so they do not shift
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | AMP74613-01A |
| Quantity | 2 brackets |
| Material | Steel |
| Origin | Manufactured in the U.S.A. |
| Warranty | 3-year/36,000 mile |
Vehicle fitment
It fits the 2019 to 2020 Ford Ranger in the Lariat, XL and XLT trims.
Use it only on the 2019 to 2020 Ford Ranger trims named above, not on Chevrolet or GMC pickups.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the vehicle-specific instructions for the Ranger, and read them all before starting.
What’s included
The kit includes two steel brackets and all the hardware needed for installation, with vehicle-specific instructions.
Not included: the BedXtender extender itself.









