Overview
The Rugged Ridge 11216.22 All-Terrain door entry guard is a black ABS plastic guard for the door sills of 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ) models. It protects the threshold from the wear caused by daily entry and exit, and it is sold in pairs.
The guards are injection molded from impact-resistant ABS with a deep tread pattern on the surface. They are longer and wider than many entry guards, with a body-hugging contour for a snug fit.
Key features
- Impact-resistant injection molded ABS plastic
- Deep tread design molded into the guard
- Longer and wider coverage with a body-hugging contour
- Included automotive-grade adhesive
- Sold as a pair
Care and wear on entry guards
Door sill guards take the daily load of feet, boots, and gear every time someone climbs in or out, so the surface wears over time. Check the guard every few months for cracks, deep scuffs, or a loosening edge. Plastic guards like this one tend to show wear first at the front corners, where most weight lands during entry.
The adhesive is the part to watch. If a corner lifts, clean the sill and the back of the guard with a mild cleaner, let both dry completely, and press the edge back down. Sand, mud, and grit trapped under the edge speed up lifting, so brush the sill clean before reseating any loose section.
Off-road use puts extra strain on the threshold, since rocks and mud can catch the edge. Keeping the tread clear of packed mud helps your boot grip and reduces the chance of slipping while climbing in.
- Inspect edges and adhesive bond after rough trail days
- Clean sills before reapplying adhesive
- Avoid harsh solvents on the plastic surface
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11216.22 |
| UPC | 804314292867 |
| Finish | Black |
| Material | ABS plastic |
| Position | Front |
| Fitment type | Direct fit |
| Mounting | Included automotive-grade adhesive |
| Quantity | Sold as a pair |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) in Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ) in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Other generations such as the 1987–1995 YJ and 2007–2018 JK are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The included adhesive is what attaches the guard, so no drilling is described.
What’s included
A pair of ABS plastic entry guards with the included automotive-grade adhesive.
















